The property comprises the front section of a single storey industrial unit, which has previously been used as a vehicle accident repair centre but is considered suitable for a variety of industrial uses. The building comprises three sections - a modern flat roofed office block to the front and two sections of workshop accommodation to the rear which have a combination of brick, block and profile sheet clad elevations; and are surmounted by profile sheet clad roofs inclusive of translucent roof lights. The workshop’s two sections provide minimum clear internal heights to the underside of the eaves of approximately 2.9m (the front section) and 4.1m (the rear section). Access to the workshop accommodation is either through the offices or via the side elevation, where there is a roller shutter loading door measuring approximately 4.1m (width) by 2.8m (height). Internally, the unit provides predominantly open plan workshop accommodation with a concrete floor and LED strip light fittings. Additionally, installed within the rear section of the workshop, there is a Burntwood vehicle spray booth. Externally, the property is located on a secure, gated site which is shared with the rear section of the building (in separate occupation), with the subject benefiting from designated parking and external storage space within the site’s front and rear yard areas
