Calle Cabeza Tocón

Plot for industrial use with a total area of 1,154 m2 and located in an area of new expansion since it is the extension of an already built industrial estate. It is bordered by the clean spot and the municipality's institute. It has electricity and water connections. The conditions of urban design are grouped and isolated building. The volume conditions are with a maximum building capacity of 0.7 m2/m2 and a maximum occupancy of 60%, with a maximum height of 2 floors or 9 meters. It can have compatible uses of offices, equipment and services. Within the plot, a parking space is required for every 200 meters built. Aesthetic conditions: At a minimum, rough brick or concrete block facades must be whitewashed in white or dark colors, and smooth, zip-line plastering can be done with white paints, sienas or exposed brick finishes. It will also be required that exposed medianeries and all walls susceptible to subsequent expansion be treated as facades with finished work quality. The covers will be inclined and can be made of any material provided that they are finished in red and tan colors. It is forbidden to use surfaces free of recesses such as material tanks and waste dumps. The passage of overhead lines inside the plots is prohibited, as well as the placement of advertisements at the crowning of buildings. All the enclosures of the different plots will be materialized with a standard fence, except for the places of access to them, which must be covered with open-plan doors with a maximum height of 2 meters. The type of fence will be made of metal mesh on a solid factory base 0.5 meters high. The total average height of the fence must be 2 meters from the ground level, at the midpoint of the main front or boundary that is determined. When accidents on the ground cause a difference of more than 1 meter between extreme points, the fence must be staggered in as many sections as necessary so as not to exceed the limit. Factory fences or concrete blocks may also be made up to a total height of 2 meters, provided that they present the quality of finished work in white or sienna colors due to their two faces.